manualshive.com logo in svg

Datalogic PowerScan RF, Руководство по программированию

Поделиться
Скачать
Datalogic PowerScan RF Скачать руководство пользователя страница 80

74

PowerScan

®

 RF 

Scanner

Symbology Overview

This section provides a brief descriptions of each of the many symbol-
ogy features and options available.

Enable Code 39

 - selects Code 39 as an active symbology and allows 

selection of Check Digit, Start/Stop and Single Digit options.

Enable PharmaCode 39

 - is a symbology subset of Code 39.  Enabling 

PharmaCode 39 allows the scanner to read both PharmaCode 39 and 
Standard Code 39 labels.

Enable Code 128

 - selects Code 128 as an active symbology.  The scan-

ner is preset to recognize all Code 128 bar codes that have between 
1 and 50 characters.

Enable UCC/EAN 128

 - chooses EAN 128 as an active symbology. The 

Automatic Identification Manufacturers, Inc. of the United States (AIM 
USA) have standardized the reporting of data sources from bar code 
reading devices.  Sending the AIM symbology prefix identifies the 
symbology to the host terminal, allowing it to specifically differentiate 
between UCC/EAN-128 (Code 128 with Function Character 1 in the 
first position) and standard Code 128 symbols.  When this feature is 
disabled, the host cannot differentiate between these symbols.

Enable Interleaved 2 of 5

 - selects Interleaved 2 of 5 as an active sym-

bology.  Allows change of Check Digit or label format (fixed or variable 
length) options.

Enable Codabar

 - selects Codabar as an active symbology.  Allows 

selection of Check Digit, Start/Stop character and format, or label for-
mat (fixed or variable length) options.

Enable UPC-A

 - enables UPC-A as an active symbology.  If you enable 

this symbology, additional options for symbology expansion and read-
ing add-ons are available.

Enable UPC-E

 - tells the scanner to recognize UPC-E as an active sym-

bology. Like UPC-A, UPC-E offers options for symbology expansion 
and reading of add-ons.

NOTE

Standard Code 39 must be enabled before
PharmaCode can be enabled.

Содержание PowerScan RF





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды