manualshive.com logo in svg

Datalogic PowerScan RF, Руководство по программированию

Поделиться
Скачать
Datalogic PowerScan RF Скачать руководство пользователя страница 119

RF Programming Manual

        

                   113

UPC/EAN Options

The UPC/EAN symbologies have the following programmable 
features:

•

Data Format Settings

•

UPC/EAN Expansion

•

UPC/EAN Add-ons

•

Price/Weight Check Digit

•

Read Verification

•

QuadraLogic™ II Decoding.

Data Format

Settings

UPC/EAN Data Format Settings

 

provides options for transmitting 

Check Digits or Number System Digits (NSD).

UPC/EAN

Expansion

Expand UPC-A to EAN-13

 

adds a leading zero to a UPC-A label which 

‘expands’ the label to the EAN-13 data format. Selecting this feature 
also changes the symbology ID to match those required for 
EAN-13.

Expand UPC-E to UPC-A expands UPC-E labels to UPC-A data format.  
Selecting this feature also changes the symbology ID to match those 
required for UPC-A.

Expand EAN-8 to EAN-13 adds five zeros in front of an EAN-8 label.  
Data is sent in EAN-13 data format. Selecting this feature also changes 
the symbology ID to match those required for EAN-13.

Expand UPC-E to EAN-13 expands UPC-E labels to EAN-13 data for-
mat. Selecting this feature also changes the symbology ID to match 
those required for EAN-13.

UPC/EAN

Add-ons

UPC-A or UPC-E and EAN-8 or EAN-13 Two and Five Digit 
Add-ons filters

Required

 means UPC/EAN bar codes must have add-ons or label 

will not be read.

Optional

 means scanner will read UPC/EAN bar codes with or 

without add-ons.

Disable

 directs the scanner not to recognize/read add-on portions 

of UPC/EAN labels, but will read the main body of the label.

Содержание PowerScan RF





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды