background image

Datalogic ADC S.r.l.

Via S. Vitalino, 13 

 

40012 Lippo di Calderara di Reno 
Bologna - Italy
Tel. +39 051 3147011

 

Fax +39 051 3147205

©2014 Datalogic, Inc.

An Unpublished Work - All rights reserved. No part of the contents of this documentation or 
the procedures described therein may be reproduced or transmitted in any form or by any 
means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates 
("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby granted a non-
exclusive, revocable license to reproduce and transmit this documentation for the purchaser's 
own internal business purposes. Purchaser shall not remove or alter any proprietary notices, 
including copyright notices, contained in this documentation and shall ensure that all notices 
appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by con-
tacting your Datalogic representative. Electronic versions may either be downloadable from 
the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our 
website and would like to make comments or suggestions about this or other Datalogic publi-
cations, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is com-
plete and accurate, however, Datalogic reserves the right to change any specification at any 
time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many coun-
tries, including the U.S.A. and the E.U. All other brand and product names may be trademarks 
of their respective owners.

Patents

See 

www.patents.datalogic.com 

for patent list.

Содержание PowerScan PBT9500





























































Отзывы: