Datalogic PowerScan PBT9500 Скачать руководство пользователя

Страница: 10 / 60

Setup

BC9180™ Base Station/Charger

BC9180 Configuration

The BC9180 configuration can be performed in several ways, by using:

• Datalogic Aladdin software

• Configuration Bar Codes

• Webserver Configuration

Datalogic Aladdin™ software

After connection, the BC9180 can be configured by sending configura-

tion strings from the Datalogic Aladdin™ via the Ethernet interface.

Figure 2. Datalogic Aladdin™ Configuration Screen

Configuration Bar Codes

Link the cradle and the reader using the procedures described in the

PowerScan

™

PM9500 or PBT9500 Quick Reference Guide (QRG). Once the

pairing is complete, you can configure the BC9xx0 cradle by scanning

configuration bar codes from this manual. See Ethernet Host Interface

Parameters Only, starting on page 15.
To configure the BC9180 using the PowerScan

™

9500 reader (paired to

the cradle with the Bind command), follow the procedure for the interface

selected.

Webserver Configuration

After successful connection to the Ethernet network, you can configure

the BC9180™ cradle parameter by using any commercial Web Browser

accessing the URL:

http://<BC9180™_IP_Address>.

Then select

Configuration

from the menu on the left.

NOTE

You can also use Aladdin software to obtain the IP address of the cradle
after the cradle is connected to the network.

Web Server configuration is always available when the BC9180™ is con-
nected to the network, REGARDLESS of the interface selection.

Содержание PowerScan PBT9500





























































Результаты поиска

Содержание PowerScan PBT9500

Отзывы:

Похожие инструкции для PowerScan PBT9500

Бренды по названию

Популярные бренды

Datalogic PowerScan PBT9500, Руководство по программному обеспечению

Результаты поиска

Содержание PowerScan PBT9500

Отзывы:

Похожие инструкции для PowerScan PBT9500

Бренды по названию

Популярные бренды