Datalogic Matrix 300N Скачать руководство пользователя страница 53

Страница: 53 / 248

Product Reference Guide

Chapter 2

Introduction

Product Description

Matrix 300N is a Datalogic industrial compact 2D imager designed and produced

to be a high performance affordable solution for both linear and two-

dimensional code reading applications.

Matrix 300N uses imaging technology and provides complete reading system

functions by integrating image capturing, decoding and communicating in a

single compact and versatile product.

Matrix 300N features excellent reading and verifying performance thanks to its

smart proprietary decoding libraries and powerful sensor. In particular, the

device comes in models with two different sensors: 1.3 megapixels and 2

megapixels.

Innovative X-PRESS interface, combined with illuminator laser pointers for

aiming, autofocus and a Good Read Spot, enhance the ease of setup and use.

Rugged construction, IP65 and IP67 protection, and max. 50°C operative

temperature make the Matrix 300N the ideal product for industrial applications.

Matrix 300N has been developed for use in numerous industries like:

Automotive

• Parts and Assemblies Traceability

• DPM (Direct Part Marked) Code Grading and Trending

• Tires Sorting

Electronics

• Parts Traceability and Control

• High Resolution Code Reading

• WIP Control and Tracking

• DPM (Direct Part Marked) Code Grading and Trending

1. The code grading function evaluates the printing quality of the standard-compliant 2D codes

in the scanned images. This feature does not take into consideration external environmental
lighting parameters, therefore it cannot be equated with the official 2D code verification func-
tion.

Содержание Matrix 300N

























































































































































































































































Результаты поиска

Содержание Matrix 300N

Отзывы:

Бренды по названию

Популярные бренды

Datalogic Matrix 300N, Руководство по продукции

Результаты поиска

Содержание Matrix 300N

Отзывы:

Бренды по названию

Популярные бренды