Datalogic Gryphon I GPS4400, Руководство по продукции

Страница: 20 / 316

Setup Custom Configuration Settings
10 Gryphon™ GPS4400
Custom Configuration Settings
Configure Interface Settings
If your installation requires you to select options to customize your reader,
turn to the appropriate section for your interface type in
"Configuration Using
Bar Codes"
starting on page 13.
•
RS-232 Only Interface
on page 17
•
RS-232/USB-Com Interfaces
on page 22
•
USB Keyboard Settings
on page 29
Global Interface Features
See "
Global Interface Features" on page 15
for settings configurable by all inter-
face types.
Configuring Other Features
If your installation requires different programming than the standard fac-
tory default settings, the following sections of this manual allow configura-
tion of non-interface-specific settings you might require:
Reading Parameters :
Reading Parameters include programming for scanning,
beeper and LED indicators and other universal settings.
1D Symbologies :
Includes options concerning the bar code label types (sym-
bologies). These settings allow you to enable/disable symbologies, set label
lengths, require check digit, etc.
2D Symbologies
on page 171 provides configuration of a personalized mix
of 2D codes, code families and their options.
Software Version Transmission
The software version of the device can be transmitted over the interface by
scanning the following label.
Transmit Software Version
RevA