Datalogic Gryphon I GPS4400, Руководство по продукции

Страница: 86 / 316

Enter/Exit Programming Mode Reading Parameters
76 Gryphon™ GPS4400
Decode Negative Image
Enables/Disables decoding a negative image for all symbologies. When
enabled, you cannot read normally-printed labels or programming labels in
this manual. Scan the “Disable” bar code below to return the scanner to its
default for this feature. To set the reader to decode only 2D codes, go to
"
2D Normal/Inverse Symbol Control" on page 174
. For additional
options, see the Aladdin configuration application.
Unlike some programming features and options, Decode Negative Image
selections require that you scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code.
CAUTION
$P,CIPVR00,P\r
Decode Negative Image = Disable
DEFAULT
$P,CI$PVR01,P\r
Decode Negative Image = Enable
When this feature is enabled, you will be unable to read other program-
ming labels in this manual.
Image Capture
For information and a list of options for Image Capture, use the Datalogic
Aladdin configuration application, available for free download from the Dat-
alogic website.