Datalogic Gryphon I GPS4400, Руководство по продукции

Страница: 141 / 316

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 131
Standard 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for
Standard 2 of 5 Length
Control
. Length 2 is the maximum label length if in
Variable Length
Mode, or
the second fixed length if in
Fixed Length
Mode. Length includes the bar
code’s check and data characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 10
provides examples for setting Length 2. See
page 241
for detailed
instructions on setting this feature.
Table 10. Standard 2 of 5 Length 2 Setting Examples
STEP ACTION EXAMPLES
1
Desired Setting (pad with
leading zeros)
00 (Ignore This
Length)
07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CS2L2
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters