Reading Parameters
Quick Reference Guide
11
Resetting Product Defaults
If you aren’t sure what programming options are in your reader, or
you’ve changed some options and want your custom factory settings re-
stored, scan the bar code below to reset the reader to its initial configura-
tion.
The product can also be restored to its original factory default settings.
Reference the PRG for this option, and a listing of standard factory set-
tings.
Reading Parameters
Move the reader toward the target and center the aiming pattern and il-
lumination system to capture and decode the image. The aiming system
will briefly switch off after the acquisition time, and if no code is decoded
will switch on again before the next acquisition. The illuminator will re-
main on until the symbol is decoded.
Aiming System
A number of options for customizing control of the Aiming System are
available. See the Gryphon I GFS4400 PRG for more information and
programming bar codes.
Defaults are based on the interface type. Be sure
your reader is configured for the correct interface
before scanning this label.
Reset Default Settings
gpd.sunwayinfo.com.cn
