![background image](http://html.mh-extra.com/html/riotec/fs5108j/fs5108j_programming-quick-manual_1463628001.webp)
1
Programming Quick Guide
-FS5108J
-FS5108K
Installation
Make sure that the scanner has the correct cable to plug in the PC as
below described:
*Note : Please install PL-2303 driver for USB serial
Reset Configuration to Default :
If you are unsure of the scanner configuration or have scanned the
incorrect codes, please scan A for USB HID or B for USB Serial. This
will reset the scanner to its factory defaults.
A
B
*
Note : Please install PL-2303 driver for USB serial
Keyboard Language
Scan the appropriate country code as below to program the
keyboard layout for your country or language. As a general
rule, the following characters are supported, but need special
care for countries other than the United States
:
@ | $ # { } [ ] = / ‘ \ < > ~
United states
of America
German
French
French Mac
Norwegian
Belgian
Spanish
Italian
Swedish
United
Kingdom
Japan
Korean
Finnish
Portuguese
Presentation Mode
ENABLE
DISABLE
1D Symbologies -1
ENABLE
UPC-A/E
DISABLE
ENABLE
JAN/EAN
DISABLE
ENABLE
Code 128
DISABLE
ENABLE
Code 39
DISABLE
ENABLE
Tri-optic
DISABLE
ENABLE
CODE 93
DISABLE