Programming
10
Gryphon™ GFS4400
Programming
The reader is factory-configured with a set of standard default features. Af-
ter scanning the interface bar code from the Interfaces section, you can se-
lect other options and customize your reader through use of the
programming bar codes available in the Gryphon I GFS4400 Product
Reference Guide (PRG).
Programming can also be performed using the Datalogic Aladdin™ Con-
figuration application, which is downloadable from the Datalogic website
listed on the back cover of this manual. This multi-platform utility pro-
gram allows device configuration using a PC. It communicates with the
device using a serial or USB cable and can also create configuration bar-
codes to print.
Using Programming Bar Codes
This manual contains bar codes which allow you to reconfigure your read-
er. Some programming bar code labels, like
"Reset Default Settings" on
page 11
, require only the scan of that single label to enact the change.
Other bar codes require the reader to be placed in Programming Mode
prior to scanning them. Scan an ENTER/EXIT bar code once to enter
Programming Mode; scan the desired parameter settings; scan the EN-
TER/EXIT bar code again to accept your changes, which exits Program-
ming Mode and returns the reader to normal operation.
Configure Other Settings
Additional programming bar codes are available in the PRG to allow for
customizing programming features. If your installation requires different
programming than the standard factory default settings, refer to the PRG.
gpd.sunwayinfo.com.cn
