Datalogic 6K-8KA FAMILY, Руководство по программированию

Страница: 6 / 73

6K-8KA FAMILY HOST MODE PROGRAMMING
2
2
2 PROGRAMMING COMMANDS
2.1 CONNECTION TO DEVICE
DESCRIPTION HOST COMMAND REPLY MESSAGE
1 Enter Host Mode <ESC> [ C <ESC> H <CR><LF>
After entering this command, the device responds with the first reply message and
then waits for the following command.
From now on the device is in the
CONNECTED state. Normal data flow is inhibited
until it comes back to the IDLE state.
2 Enter Terminal Mode <ESC> ] B <ESC> R <CR><LF>
After entering this command, the device responds with the second reply message
and then waits for the following command in Terminal mode.
3 Enter Programming Mode <ESC> c M <B0
H
> ADDR <ESC> c <CR><LF>
ADDR is a character indicating the address of the device in an LONWORKS
Master/Slave reading system layout
ADDR = <30
H
> + <Device Address> where:

Device Address = 0 : Stand Alone device or Master LONWORKS device

Device Address = 1 to 31 : Slave LONWORKS device
This means:

ADDR = <30
H
> : Stand Alone device or Master LONWORKS device

ADDR = <31
H
> to <4F
H
> : Slave LONWORKS device
After entering this command, the device responds with the third reply message and
then waits for one or more programming strings as shown in Chapter 3 and 4.