DKG-255 User Manual Firmware V-1.0
- 6 -
The DKG-255 is a microprocessor controlled governor control unit designed to control the engine speed
with fast and accurate response to load changes.
The DKG-255 connects to a
forward acting
proportional electric actuator and a magnetic speed sensor.
It is able to control a wide variety of engines in constant speed (isochronous) or droop modes.
Thanks to its PID control system, the optimal response specific to each engine is performed.
The unit is capable of delivering actuator currents as high as 10 Amps. However, the output circuit is
protected against short circuit and overload.
Protection against reverse battery connection and transient voltages are provided.
The unit is suitable for both 12 and 24V operation.
The unit is designed to be mounted inside a control cabinet. A vertical mounting position is preferred so
that the heat is dissipated with vertical airflow.
Extreme heat may affect the performance of the unit and should be avoided.
1.2 Mounting the Unit
1.1 Introduction to the Control Unit
1. INSTALLATION INSTRUCTIONS
