DKG-255 User Manual Firmware V-1.0
- 19 -
Parameter Definition
Unit
Min
Max
Factory
Set
Description
P_22 PID Auto Setup
-
0
1
0
This is the parameter to enable auto
PID setup operation.
0:
PID Auto Setup disabled
1:
PID Auto Setup enabled
P_23 Actuator Maximum
Value
%
30
100
100
This parameter defines the maximum
value of actuator output.
P_24 Actuator Minimum
Value
%
0
50
0
This parameter defines the minimum
value of actuator output.
P_25 Save Configuration
-
0
15
0
This parameter is used to save current
configuration of the device. User
defined configurations can be saved
with the numbers from 2 to 15. 1 is
default factory settings of the device.
P_26 Restore
Configuration
-
0
15
0
This parameter is used to restore user
defined configurations of the device. 1
is the default factory settings of the
device. User defined configurations can
be restored from 2 to 15.
P_27 Rpm Read from
Canbus
-
0
1
0
This is the parameter to enable rpm
target setting through canbus
communication. This feature will be
available soon.
0:
Canbus rpm read is disabled
1:
Canbus rpm read is enabled
P_28 Boot Mode Enable
-
0
1
0
This is the parameter to enable
firmware update mode. In order to
cancel boot mode, turn power off and
on again.
0:
Boot mode disabled
1:
Boot mode enabled
7. PROGRAM PARAMETER LIST (continued)
