30
DataDirect Networks StorageScaler 6000 User Guide Rev B
4.7Replacing the DEM
Important
The DEM
card should only be replaced by trained personnel. The handle rib will light up BLUE for
service.
Warning
Observe all conventional ESD precautions when handling Storage Scaler 6000 modules and
components. Avoid contact with backplane components and module connectors, etc.
Instructions are also clearly labeled on the inside cover of the enclosures (
Figure 4–3
).
To Replace the DEM
1
Grip the top latch, rotate it until you reach the limit of rotation, and then pull up to remove the DEM.
2
Insert the replacement DEM.
3
Press on the latch to rotate it down to lock it into place.
Figure 4–3
DEM Removal Label
USO
RESTRITO
