Troubleshooting
DataDirect Networks StorageScaler 6000 User Guide Rev B
29
4.6.3 Replacing the Drive Carrier Module
Warning
Observe all conventional ESD precautions when handling Storage Scaler 6000 modules and
components. Avoid contact with backplane components and module connectors, etc.
Instructions are also clearly labeled on the inside cover of the enclosures.
Caution
Drive spin down
Damage can occur to a drive if it is removed while still spinning. If possible, use the operating system to
spindown the drives prior to removal. If this is not possible, we recommend that you perform
All
steps of
the following procedure to ensure that the drive has stopped prior to removal:
To Insert the Drive Carrier Module
1
Release the carrier handle by sliding the latch backwards.
2
Insert the carrier into the enclosure.
3
Slide the drive carrier, gently, all the way into the enclosure.
4
Cam the drive carrier home. The camming foot on the base of the carrier will engage into a slot in
the enclosure.
5
When the carrier is fully home, close the handle. You should hear a click as the latch engages and
holds the handle closed.
6
Close the enclosure.
Figure 4–2
Drive Carrier - Handle Released
USO
RESTRITO
