Installation
E F 3 0 1 5 S e t u p G u i d e ( R e v A )
16
Power cycle
To power on the system:
1.
Power up drive enclosure(s). Allow several seconds for disks to spin up.
Press the power switches at the back of each drive enclosure to the On position.
2.
Power up the controller enclosure next.
Press the power switches at the back of the controller enclosure to the On position.
To power off the system:
1.
Stop all I/O from hosts to the system.
2.
Shut down both controllers using
either
method described below:
- Use RAIDar to shut down both controllers, as described in the online help and the
EF3015 RAIDar User Guide.
- Use the command line interface (CLI) to shut down both controllers, as described in
the EF3015 CLI Reference Guide.
3.
Press the power switches at the back of the controller enclosure to the Off position.
4.
Press the power switches at the back of each drive enclosure to the Off position.
