Datacom Systems VS-1200-S Series Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 90

background image

VS-1200-S Data Acccess Switch

72

© 2011 Datacom Systems Inc

1. Introduction

This memo defines managed objects and notifications exposing status information about power
supplies associated with Datacom products.

2. The Internet-Standard SNMP Management Framework

For a detailed overview of the documents that describe the current Internet-Standard
Management Framework, please refer to section 7 of RFC 3410 [RFC3410].

Managed objects are accessed via a virtual information store, termed the Management
Information Base or MIB. MIB objects are generally accessed through the Simple Network
Management Protocol (SNMP).

Objects in the MIB are defined using the mechanisms defined in the Structure of Management
Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is
described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58,
RFC 2580 [RFC2580].

3. Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].

4. Overview

This section provides an overview of this MIB module.

Section 4.1 provides a discussion on the use of SMIv2 Syntax and Textual-Conventions.

Section 4.2 discusses the relationship of this MIB module to other MIB modules.

Section 4.3 presents the organization of this MIB module.

Section 4.4 provides suggestions for management applications using this MIB module to monitor
the status of power supplies associated with Datacom products.

4.1 Use of SMIv2 Syntax and Textual-Conventions

This section discusses the SMIv2 syntax and Textual-Conventions (TC) used for the syntax of
SNMP managed objects defined within this MIB module.

4.1.1 SMIv2 Syntax

This section discusses the syntax types defined in the 'Structure of Management Information
Version 2 (SMIv2)' [RFC2578] and used in this MIB module.

4.1.1.1 Unsigned32

There is one object defined in this MIB module using the SMIv2 Unsigned32 syntax type.

«
...
70
71
72
73
74
...
»

Содержание VS-1200-S Series



























































































Отзывы:

Нет отзывов

Похожие инструкции для VS-1200-S Series

Бренд: Lindy Страницы: 38

Бренд: Vega Страницы: 36

Бренд: Icy Box Страницы: 10

PSEN ma2.1p/ATEX

Бренд: Pilz Страницы: 8

Бренд: Aaeon Страницы: 76

Бренд: 3onedata Страницы: 2

Stackable MiniHub Le2801a

Бренд: Black Box Страницы: 2

Бренд: Presentation Switchers Страницы: 18

Бренд: WIKA Страницы: 52

Бренд: Gefen Страницы: 15

Бренд: PABX Страницы: 16

Бренд: CYP Страницы: 20

Бренд: Boss Страницы: 1

Бренд: Numatics Страницы: 6

Бренд: MS Sedco Страницы: 2

Бренд: DirectConnect Страницы: 4

IFS NS2503-8P/2C

Бренд: Interlogix Страницы: 11

Бренд: iSmartAlarm Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды