Datacom Systems VS-1200-S Series, Руководство пользователя

Страница: 20 / 90

VS-1200-S Data Acccess Switch 20
© 2011 Datacom Systems Inc
4.1.2 Password Recovery
Password Recovery is provided for cases where a user has forgotten the Superuser and/or
Administrator login password. Password recovery is accomplished by connecting to the unit serially
using a HyperTerminal like program and rebooting the unit. As the power-up sequence is occurring,
depress <Control> <C>. Upon receipt of this command, a text recovery key will be generated and
displayed prior to the prompt. This key is used to reset the passwords. An example recovery key
prompt is: 617A6185774$
You must call Datacom Service Center with this recovery key in order to obtain the required
response to reset passwords. Given a valid reset response, the
factory default passwords will be
saved in Non-Volatile memory. If an invalid response is given, a new recovery key will be calculated
and displayed at the prompt, as described above, after first clearing the screen.
4.1.3 Basic Commands (Read Only Access)
The following section shows the long form of the basic command set with the shortcut input for the
command noted in parenthesis. All commands, either the exact long form or the shortcut form, are
entered after the prompt (default >) at the cursor. No auto-fill mode is available. After the topic
heading, a brief overview of the command display function is given followed by an example
(Example: >) command input.
4.1.3.1 HELP (HE) or (?)
When this command is entered, a list of commands, their shortcut inputs, and their descriptions will
display. For the use and application of each command, refer to the individual command description
within this section. The HELP command displays the available commands depending upon the
specific product and not in ascending order as shown:
Example: > ?
Available commands:
ADD USER
AD US Add User
DELETE USER DE US Delete User
EDIT USER ED US Change Username/Password
EXIT EX Exit Shell
HELP HE / ? Show Help
POWER STATUS PO ST Show Power Supply Status
SET DATE SE DA Set System Date
SET GATEWAY SE GA Set Default Gateway
SET IP SE IP Set IP [subnet mask] [default gateway]
SET LINK PROTECT SE LP Set Link Protect parameters
SET PING SE PI Set Ping ON or OFF
SET PORT GROUP SE PO GR Set Group Name
SET PORT MONITOR SE PO MO Set Monitor Configuration
SET PORT NAME SE PO NA Set Port Name (max 32 bytes)
SET PORT SPEED SE PO SP Set Port Speed
SET PORT VTAG SE PO VT Set Port VTAG Stripping
SET PORT VTAP SE PO VP Set Port VTAP
SET PROMPT SE PR Set Command Prompt (max 32 bytes)
SET SNMPv3 SE V3 Set SNMP ON or OFF