Datacom Systems VS-1200-S Series, Руководство пользователя

Страница: 48 / 90

VS-1200-S Data Acccess Switch 48
© 2011 Datacom Systems Inc
Whether or not to trust the host key is your choice. Connecting within a company network, you
might feel that all the network users are on the same side and spoofing attacks are unlikely, so you
might choose to trust the key without checking it. Connecting across a hostile network (such as the
Internet) you should check with your system administrator.
Step 4.
After you have connected, you will be asked to
login as:
, type
Administrator
(default
value) and press the
Enter
key. At the
Administrator@hostname (or IP address)'s password:
prompt, type
admin
(default value) and press the
Enter
key to display the command line
>
prompt.
To see a list of available commands, at the
>
command line prompt, type
?
and press the
Enter
key .
Step 5.
Type
Exit
and press the
Enter
key to end the connection session. Close PuTTy.
4.7 SNMP Configuration
IMPORTANT:
SNMP MUST be enabled and there MUST be at least one SNMP user for the
SNMP feature to work.
Once installation of the Link Aggregation Tap has been completed in your chosen network location,
if at least one SNMP user has not been created, refer to the
CLI Command Set to:
Step 1.
SET SNMPv3 (SE V3) [ON].
Step 2.
SET SNMPV3 SUPERUSER (SE V3 SU) name auth authPass priv privPass
Use your Network Management System to access the Link Aggregation Tap to perform
GET
,
SET
,
TRAP
, etc. SNMP functions.
The Appendix A - Agent Capabilities MIB , Appendix B - Power Supply MIB and Appendix
C - Structure of Management MIB sections are for your reference.
RELEASE NOTES:
1. When adding a TRAP destination, any specified snmpTargetAddrTagList string must be
restricted to alphanumeric characters (0-9, a-z, A-Z).
20
30
31
63 71
83