DataCard SR200, Руководство по установке

Страница: 12 / 94

4 Planning the Installation
Choosing a Location
The performance of the printer and optional laminator is strongly influenced by the installation
location. Install the unit(s) in a location that meets the following criteria:

Install the printer in a location that meets or exceeds ISO14611 ‐ 1 Class 8 cleanliness
standards. Using the printer in dusty locations may cause print blurring and printhead
malfunctions.

Power off the printer when printing is not being performed. Leaving power on for long
periods without printing may allow fine dust to collect inside the printer, causing print
blurring and causing dust to adhere to cards.

Avoid locations susceptible to strong vibration or shock.

Avoid locations exposed to direct sunlight.

Avoid locations where there is a possibility of metal objects or other foreign material
entering the printer.

Avoid areas near walls with little ventilation. Refer to “Ventilation Clearance” on page 5 .

Avoid unstable locations and angled surfaces.

Avoid locations prone to static electricity, such as a carpeted room.

Avoid areas near air conditioners, humidifiers, or heat sources that may cause condensation
within the printer.
Operating Environment
Install the printer in an environment with the following recommended temperature and humidity
range:

Temperature: 59°– 86°F (15°–30°C), or 63°–83°F (17°–28°C) if using peel ‐ off (PO) or UV ink.

Humidity: 35%–70%, non ‐ condensing, or 35%–60% if using peel ‐ off or UV ink.
Security
Both the SR200 & SR300 printers and the LM200 & LM300 laminators have slots for cable ‐ type
security locks. If you plan to use a cable lock, select a location that provides a secure place to
fasten the cables.
Caution: Using the printer in an environment with temperatures that are cooler than
the recommended range can cause retransfer errors. Using the printer in an
environment with temperatures that are warmer than the recommended range can
cause errors such as card warping and wrinkling of the film.