DataCard SP75 Plus, Руководство пользователя

Страница: 72 / 136

Page 67
SY-01327 Data Error
The request sent to the printer is not supported.
Possible Cause 1: The printer features (such as magnetic stripe or an L2
laminator) have changed. The driver Printer Toolbox, Properties, or Printing
Preferences dialog box has not changed to remove settings that are not
supported by the printer and you have chosen and applied a setting that the
printer does not support.
Solution 1: Close the driver Properties or Printing Preferences dialog box
and open it again to display the settings for the printer. On the Printer
Toolbox, wait until “The printer type is SP75.” appears before using buttons
or settings in the Printer Toolbox, Printer Diagnostics, or the Properties or
Printing Preferences dialog boxes.
Possible Cause 2: For a directly networked printer, the message “A printer
has been identified. (DR 00921)” was displayed on the PC and the OK or
Close button was used. After that, you used the Printer Toolbox,
Diagnostics, or the Properties or Printing Preferences dialog box before
settings were updated for this printer.
Solution 2: Do not close the message box. Follow the instruction to wait
until the message box closes on its own. If you are using Printer Diagnostics,
close it and wait until the message box closes on its own.