manualshive.com logo in svg

DataCard SP75 Plus, Руководство пользователя, Страница: 2 / 136

Поделиться
Скачать
DataCard SP75 Plus Скачать руководство пользователя страница 2

Information resources for the SP75 Printer

 

SP75 Printer 
Guide

The Printer Guide (this document) contains operating information for the 
printer. 

SP75 Quick 
Install Guide

The Quick Install Guide, packed at the top of the printer carton, shows 
you the steps to install the printer.
For detailed installation information, see  
e-Guide/SP Series/SP_Info_Central.chm on the driver CD-ROM.

Message Help If you see a message, click Help on the message box. 

Really!

 Help topics 

are short and to the point.

SP Series Info 
Central and 
e-Guide

For in-depth information about using the printer, install 

SP Info Central

 on 

a Windows PC, then click the icon on the desktop. (Insert the Smart 
Driver CD-ROM and choose User Information to install SP Info Central.)

FAQs

Service and Support FAQs at www.datacard.com provide answers to questions about the printer.

Dealer

For help with questions not addressed by other SP Series printer information, contact your dealer.

Customer Care Contact the Datacard Customer Care Center at 1.800.328.3996 (U.S. & Canada) or 

1.952.988.2316 (worldwide).

Содержание SP75 Plus









































































































































Отзывы:

Нет отзывов