manualshive.com logo in svg

DataCard SP75 Plus, Руководство пользователя, Страница: 135 / 136

Поделиться
Скачать
DataCard SP75 Plus Скачать руководство пользователя страница 135

Legal Notices (FCC)

Please note and heed the WARNING and CAUTION labels that have been placed on the equipment for your 
safety. Please do not attempt to operate or repair this equipment without adequate training.

Liability statement

This Datacard® product has been built to the high standards of DataCard® Corporation. See 

SP Series Info 

Central

 for the statement of liability.

Regulatory compliance

This Datacard® product conforms to FCC and regulatory requirements as specified in North America,  Europe, 
and Asia. See 

SP Series Info Central

 for detailed regulatory compliance information.

Trademark acknowledgments

Trademark, service mark, and copyright acknowledgments are listed in 

SP Series Info Central

.

Proprietary Notice

All drawings and information herein are the property of DataCard® Corporation. 

© 2005 DataCard® Corporation. All rights reserved. 

Содержание SP75 Plus









































































































































Отзывы:

Нет отзывов