DataCard SD260, Руководство пользователя

Страница: 118 / 156

106 Card Design Tasks
Block Print Escape
A block print escape begins with ~PB% .
Examples:
Topcoat Add Escape
The topcoat add escape applies topcoat only in the area defined in the escape. Topcoat is not
applied to other areas of the card. All full-color printing should be covered with topcoat, so use
this option with care.
The topcoat add escape begins with ~TA% .
Examples:
Topcoat Remove Escape
With a topcoat remove escape, the topcoat is not applied to the areas defined by the escape. All
other areas of the card have topcoat.
The topcoat remove escape begins with ~TR% .
Full-Card Topcoat Options

Use the escape ~TR%? to override the Card Printer Driver preset masks and topcoat the
entire card side .

Use the escape ~TA%? to override the Card Printer Driver preset masks and apply no topcoat
to the entire card side .
Print several cards using your card design and application to verify that printing and topcoat are
applied as you intend.
~PB%10 10 55 15? Printing is blocked in one area.
~PB%3.2 0 86 14.7;20 13 60 9? Printing is blocked in two areas, such as a
magnetic stripe and signature panel.
~PB%? No printing is blocked on the current card.
~TA%0 0 85.6 37? Topcoat is applied to one large area of the card.
~TA%16.8 0 37.1 5;30.5 45.23 15 15? Topcoat is applied in two areas.