DataCard SD Series, Руководство пользователя

Страница: 35 / 106

SD Series Card Printers User’s Guide 23
Chapter 4: Printing Cards
Before Starting to Print
This section explains how to print a card. Make sure that:
•
Cards are loaded in the printer or available to insert.
•
Ribbon is loaded in the printer. For the steps to follow, refer to “Load the
Print Ribbon” on page 20 . If you are using the SD460 system, refer to
Appendix A, “ SD460 Laminating System ”, for information about preparing
the laminator.
•
The card design is set up. If you need to set up or modify the design, refer to
“Elements of Card Design” in your printer’s Installation and Administrator’s
Guide.
H
INTS
& T
IPS
Make sure that magnetic stripe cards are loaded correctly. The printer shows the
correct position.
You also can:
•
Print a test card directly from the printer. Refer to “Print a Test Card” on
page 18.
•
P rint a driver sample card. Refer to “Printing a Driver Sample Card” in your
card printer’s Driver Guide .