DataCard RP90 PLUS E, Руководство по установке оборудования и драйверов

Страница: 14 / 48

RP90 Plus E Card Printer Installation Manual 11
11.
Select the Printer model from the table. If this is the first RP90 Plus E printer installed
on this PC, the default printer is “Datacard RP90 Plus E U1.” For best results, use the
printer name shown.
•
“U1” is the unit number, and it must match the USB port you create and the “Unit
No.” setting described in the
Printer LCD Panel section of the User Guide.
•
If this is not U1, set the unit number of the printer now, as described in the Printer
LCD Panel section of the User Guide. Then, continue with installation.
12.
Check the Make this the default printer box if you plan to use only this printer from
this PC. Click Next .
Unit No. Setting in
Printer LCD Panel
Printer Model of This Dialog
Box
USB Port
1 (Default) Datacard RP90 Plus E U1 RP90 Plus E U1
2 Datacard RP90 Plus EU2 RP90 Plus E U2
3 Datacard RP90 Plus EU3 RP90 Plus E U3
4 Datacard RP90 Plus E U4 RP90 Plus E U4
5 Datacard RP90 Plus E U5 RP90 Plus E U5
6 Datacard RP90 Plus E U6 RP90 Plus E U6
Unit No. 7 Datacard RP90 Plus E U7 RP90 Plus E U7