Data Video RMC-400, Инструкция по эксплуатации

Страница: 21 / 26

21
Recalling a previously saved Clip
1. On the RMC-400 control panel, press the “
MENU
” button.
2. Rotate the jog wheel to browse to the “
SELECT BIN
” option on the on-screen main
menu and press the “
ENTER
” button to enter the option.
3. Again, rotate the jog wheel to cycle through the BIN numbers and press the “ ENTER ”
button to select the desired BIN number.
4. After the BIN number is selected, press the “ RECALL ” button to open the Recall mode
menu where the user will be able to see the BIN number as well as the clip number on
the status bar located at the top center of the AUX output display.
5. Select “ SELECT CLIP ” option to start clip selection, which can be done by rotating the
jog wheel to cycle through the available clip numbers. Press the “ ENTER ” button to
load the selected clip number.
6. After the desired clip is selected, the user can either clear the memory buffer content
and load the selected clip (
Clear and Recall
) or append the selected clip to the
existing buffer content (
Recall Append
)
7. As the clip is being loaded, the HDR-10 device will automatically enter Trim mode for
clip editing. To start the replay, simply press the “
REPLAY
” button.