Data Video RMC-400, Инструкция по эксплуатации

Страница: 20 / 26

20
5. Applications
In this section, we provide three examples of how you can use the RMC-400 to operate the
HDR-10 Highlight Replay Recorder.
Saving an edited clip or highlight to MOV file
The HDR-10 only saves the marked clip/highlight on the buffer line to the removable SSD as
an uncompressed MOV file. The file size will be large, up to 4GB, depending on the clip
length in seconds. The saved clip can be replayed from the unit at a later stage or added
(appended) to other clips on the same SSD. The SSD removed from the HDR-10 can also be
used to transfer saved clips to a non-linear editing computer.
1. Power on the HDR-10 and the RMC-400 and by default, the HDR-10 will be in
Capture
mode .
2. Press the “ MARK IN ” button to place the start cue
3. To stop capturing, press the “ TRIM ” button to exit Capture mode and enter Trim
mode .
4. In Trim mode , use jog and shuttle wheels to adjust the cursor position and once the
cursor is at the corresponding desired position, place the start cue and/or the end cue.
5. After the start cue and end cue positions are determined, press the “ SAVE CLIP ”
button to save the clip.
Note: There is no clip naming function on the current HDR-10 recorder device. Therefore,
it is necessary for the user to make a note of the purpose of each clip saved. However,
the user is allowed to view the first frame of every clip saved while browsing through the
clip by SELECT CLIP.
Capture and Replay
1. Power on the HDR-10 and the RMC-400 and by default, the HDR-10 will be in
Capture
mode .
2. The HDR-10 will start capturing once it is in Capture mode .
3. Press the “ MARK IN ” button to place the start cue
4. To stop capturing, press the “ TRIM ” button to exit Capture mode and enter Trim
mode .
5. In Trim mode , use jog and shuttle wheels to adjust the cursor position and once the
cursor is at the corresponding desired position, place the start cue and/or the end cue.
6. Press the “ MARK IN ” button to place the start cue and press the “ MARK OUT ” button
to place the end cue.
7. After the start cue and end cue positions are determined, press the “
REPLAY
” button
to exit
Trim mode
and enter
Replay mode
.
8. Set the clip playback speed by moving the T-Bar to the corresponding position.
9. If Replay mode is manual, press the “Play / Pause” button to start the clip playback.
However, if the Replay mode is auto, the clip playback will be automatically started.