Data Video RMC-400, Инструкция по эксплуатации

Страница: 17 / 26

17
The user is also allowed to repeat the replay clip for unlimited counts by enabling the LOOP
PLAY
option in the OSD menu. To stop repeating the replay clip, simply set the
LOOP PLAY
to
OFF
.
Recall
To recall a previously saved clip, press the “ RECALL ” button on the RMC-400 to open an on-
screen menu on the AUX output display.
In this menu-driven Recall mode , browse the on-screen menu by rotating the jog wheel
and press the “
ENTER
” button to select a particular option.
The menu options in Recall mode are describe in the table below.
SELECT CLIP Select this option to start clip selection, which can be done by
using the jog wheel to cycle through the available clip numbers.
CLEAR AND RECALL
Clear the memory buffer content and load the selected clip.
RECALL APPEND
Load the selected clip by appending it to the existing buffer
content.
Menu
Press the “MENU” button to open the main on-screen menu, which can be seen at the top
center of the AUX output display.