Data Video RMC-400, Инструкция по эксплуатации

Страница: 15 / 26

15
In Capture mode , the buttons depicted as follows will turn red, allowing the user to
perform video capture operations.
The “ MARK IN ” button drops the start cue to set the start point of a particular replay clip
and marks the beginning of a possible video highlight to be replayed. Pressing the
“ SHORT ”, “ MEDIUM ” and “ LONG ” buttons will capture the latest time duration of the
video as assigned to these three buttons. The time duration of these three buttons can be
configured in the
Quick Play Setup
option of the OSD menu.
Right after the “
MARK IN
” button is pressed, a yellow double box mark will be shown
progressing along the red buffer line. When the user decides enough video has been
captured for the highlight clip, the “ TRIM ” button is pressed to end Capture mode and the
unit automatically enters TRIM Mode for clip editing.
Trim
The HDR-10 enters Trim mode when Capture mode is exited after the “ TRIM ” button is
pressed. In Trim mode, the buffer line changes from red color to green color. This confirms
the mode has been changed.
In Trim mode , the buttons depicted as follows will turn green, allowing the user to review,
edit and save the clip captured in Capture mode .