DAS AUDIO INTEGRAL-MA, Руководство пользователя

Страница: 47 / 48

47 Manual INTEGRAL-MA
Two additional configurable parameters, Bridge mode (ONLY
AVAILABLE ON MA MODELS) and Amp Bridge, are also available
from the Settings tab. Bridge mode is used with systems with
transformers (100 / 70V) or to double the output power of the am-
plifier.
Note that the physical output pins employed when using the am-
plifier in Bridge mode are different from those used when config-
uring the amplifier in stereo mode.
In the Settings tab, you can also configure the DANTE digital out-
put channels and select the output channels that the device will
send to the network. The DANTE 1, DANTE 2, DANTE 3 and DANTE
4 channels can be a copy of any of the analog inputs IN A, IN B, IN
C, IN D or any of the eight output channels OUTPUT 1, 2, 3,…..,8. This
way, the audio injected into the network from a M88 device can
be processed. In the following example, the DANTE 1,2,3,4 chan-
nels are copies of the input channels A, B, C and D (a D will appear
on the input or output channel that has been assigned):
In addition to the previously mentioned options, from the Settings
tab, the user can also enable and disable the phantom power supply
of the analog input channels IN A, IN B (PH will appear on the chan-
nel with active phantom):
INTEGRAL
ALMA control