DAS AUDIO INTEGRAL-MA, Руководство пользователя

Страница: 28 / 48

28 Manual INTEGRAL-MA
INTEGRAL
Front display navegation and settings
SRC SELECTION
Select the desired output channel and press ENTER. Using the UP / DOWN
keys, select the inputs you wish to assign to that channel. In the front pan-
el, all the inputs that have been assigned to an output channel (AMP or
AUX) will keep their given gain. That is, if you assign inputs IN A+B to the
output channel AMP-1, and previously in the INPUT GAIN menu you had
selected IN-A 0dB and IN-B -6dB, AMP-1 will have as an input signal the
sum of channels A and B, but input´s B volume will be attenuated 6dB.
Note that if the input channel selection is OFF, nothing will be assigned to
that output channel.
The following are the input options and combinations available for output
channels (AMP-1,2,3,4 and AUX-1, 2, 3, 4) in the front panel:
OFF: no input assigned
IN-A: only channel A
IN-B: solo canal B
IN-C: only channel C IN-D: solo canal D
IN-E: only channel E IN-F: solo canal F
IN-G: only channel G IN-H: solo canal H
IN A+B: sum of channels A and B IN A+C: sum of channels A and C
IN A+D: sum of channels A and D IN C+D: sum of channels C and D
IN E+F: sum of channels E and F IN G+H: sum of channels G and H
ANALOG: sum of all the analog channels A, B, C and D
DANTE: sum of all digital channels E, F, G and H
Note that to access the input-output matrix with advanced gain set-
tings for each input, you need to connect the unit to the network and
configure these settings with ALMA.
A+C and A+D channel combinations can be useful when the user
wants to sum in an output channel a microphone input (typically con-
nected to input A or B, where phantom power is available) and a line
input (channel C or D).
It is not necessary to route the priority input channels for each output
from the SRC Selection menu. That is, if for the output channel AMP-1,
you have selected as input sources the sum IN A+B and want to select
input E (DANTE-1) as priority, it is not necessary to access the SRC Se-
lection menu to select IN-E as the input channel for AMP-1. Just select
IN-E as the priority input assigned to the channel AMP-1 from the Pri-
ority menu.