DAS AUDIO INTEGRAL-MA, Руководство пользователя

Страница: 7 / 48

7 Manual INTEGRAL-MA
INTEGRAL
Rear panel
A B C D E F G
A
B
C
D
Analog Signal Inputs
Analog signal input connections use 3.5mm pitch, 5-pin “Termi-
nal Block”-type connectors. There are 4 input channels: INPUT
A, B, C and D. Channels A and B can be used as microphone
inputs activating the phantom power from the front panel.
Analog Gain Controls for Mic/Line Inputs
Gain controls for input channels A and B. They should only be
used when channels A and B are employed as microphone in-
puts.
Processed Analog Signal Outputs
These 3.5mm pitch, 5-pin “Terminal Block”-type connectors are
the outputs carrying the amplifier´s DSP processed signals.
There are 4 auxiliary processed output channels: AUX 1, AUX 2,
AUX 3 and AUX 4. These outputs can be used to send signal to
other amplifiers without processing (INTEGRAL-Axxxx models)
or to self-powered systems.
RJ45 Connectors
RJ45 connectors connected to an internal Ethernet switch that
allows daisy-chaining between units. It is recommended to use
a CAT5e cable or superior. The RJ45 ports will be used for:
• Connecting the unit to the network so it can be controlled
with ALMA / OSC
• Send/Receive DANTE digital audio