DAS AUDIO INTEGRAL-MA, Руководство пользователя

Страница: 42 / 48

42 Manual INTEGRAL-MA
All units on the network must be assigned to a zone.
By default, when the software is launched, a zone is created au-
tomatically (Zone 1).
To create a new group of devices and add it to Zone 1, press the
+ icon that is shown below.
ALMA is the control and monitoring software for DAS Audio´s
self-powered systems, rack amplifiers with built-in processors
and matrixes. This advanced tool allows you to manage the sys-
tems instantly and intuitively, reducing system configuration
times and streamlining the set-up process. The application al-
lows all kinds of advanced settings, such as configuring up to
two priority levels per output and digital audio output settings.
Connectivity among units is done via TCP IP protocol.
There are different ways of configuring a network with the In-
tegral devices; for more information, see the network Connec-
tions chapter in this manual.
First, when working “online” with all the units connected to the
network, run a scan to detect them and assign them to a zone.
During the scan process, the units detected will show under
the “not assigned” tab on the left hand side of the screen.
INTEGRAL
ALMA control