DAPAudio DLM-26, Руководство по эксплуатации продукта

Страница: 27 / 33

25
Crossover types and frequencies
Low pass filter type
For the lower crossover frequency of the outputs, the following filter types are available:
• Bessel 12 and 24dB/octave,
• Butterworth 6, 12, 18, 24 and 48dB/octave
• Linkwitz-Riley 12 and 24 and 48dB/octave
The display shows the following different options:
• BUT 6
• BUT 12, BES 12, L-R 12
• BUT 18
• BUT24, BES24, L-R 24
• BUT48, L-R 48
Low pass filter frequency
The crossover frequencies can be adjusted between 15 Hz and 16 kHz in 1/6 octave steps. Below is Out
and above OFF. OUT is at the bottom end and OFF is when adjusted > 16Khz
Note: If the Low Edge Frequency is >16 KHz the channel output is switched OFF. In contrast to the mute-
function, the LED-display does not show any output.
High pass filter type
For the upper crossover frequency of the outputs, the following filter types are available:
• Bessel 12 and 24dB/octave,
• Butterworth 6, 12, 18, 24 and 48dB/octave
• Linkwitz-Riley 12 and 24 and 48dB/octave
The display shows the following different options:
• BUT 6
• BUT 12, BES 12, L-R 12
• BUT 18
• BUT24, BES24, L-R 24
• BUT48, L-R 48
High pass filter frequency
This control adjusts the cut off frequency of the selected High Frequency crossover.
The crossover frequencies can be adjusted between 15 Hz and 16 kHz in 1/6 octave steps.