12
Programs
Saving programs
You can save up to 60 programs in the memory of the DLM-26. Press the SAVE/ENTER-button (
7
) to store
the program in the memory. The display shows you the last used program on the screen. Press the
PREV/NEXT-buttons (
8+9
) for adjusting program 1-60. With these buttons, you can also rename the
program. In order to move the cursor (e.g. for entering the next letter or correcting the last letter), press the
/
- buttons (
5+6
) or the jog-wheel.
Confirm your setting by pressing the SAVE/ENTER-button (
7
).
The little star in the top right corner indicates that the current program has not been saved since the last
modification.
Naming programs
The program can be given a name up to 8 digits in length. To make a new name, press the
- button (
6
)
to move the cursor into the name area of the LCD. The LCD display will display the current name of the
program that is being edited and the cursor will stand under the first character to be modified. Characters
can be changed by either using the PREV/NEXT-buttons (
8+9
) or the jog-wheel (
4
). The next/previous
character can be selected by using the
/
- buttons (
5+6
).
Press the SAVE/ENTER (
7
) a second time, will save the settings if the program location is not locked.
Locking programs
In order to avoid overwriting your settings, you can lock a program. After saving, you can choose Locked or
Unlocked. Choose your selection with the jog-wheel (
4
) or with the
- button (
6
) and then press the
SAVE/ENTER-button (
7
) to confirm your setting.
Saving a program will fail when the SAVE/ENTER-button (
7
) is pressed and the lock character is shown in
the display. After this message has disappeared, you can unlock the program with the jog-wheel (
4
).
Recall programs
You can recall a program via the Recall-button (
10
). Select the desired program by using the PREV/NEXT-
buttons (
8+9
) or the jog-wheel (
4
). You can only make a selection from the already saved programs.
Press the Recall-button (
10
) a second time in order to recall the desired program. There will always be a
default program in the unit’s memory.
Содержание DLM-26
