19
Owner Lock ( )
If the owner lock is activated, either an individual or all parameters of a program can be locked.
This lock is used for avoiding unintended/unwanted changes to the DLM-26. When Owner Lock is activated,
only the display contrast or the Owner Lock can be adjusted.
Press the
- button (
6
) in order to enter the password-area. The standard password is SOMA. Enter the
new password with the
/
- buttons (
5+6
) and confirm with the Save/Enter-button (
7
).
Note:
Please write down the new password and keep it in a safe place. There is
no possibility
to override
a password you have entered.
The display shows.
If you want to lock all parameters, set the selection Lock All? to Yes. If several parameters were locked
before, you can unlock all parameters by changing the selection from Yes to No and save with the
Save/Enter-button.
If you want to unlock individual parameters, select the respective level by pressing the jog-wheel.
Set the Owner lock to OFF and Enter the Password (SOMA).
If you want to lock individual parameters, select No. Select the respective level by pressing the jog-wheel.
Select the desired parameter via the Prev / Next - buttons. Set the lock of the individual parameter by
turning the jog-wheel. The display shows
. Then press the SAVE/ENTER-button (
7
).
If the memory is sufficient to adjust more equalizers, you have the possibility to lock this feature.
Confirm with the SAVE/ENTER-button (
7
).
Note:
all locked parameters will not be displayed during the operation.
In order to unlock the DLM-26, press the
- button (
6
) to enter the password section. Enter the password
via the parameter knob and the
/
- buttons (
5+6
) and confirm via the Save/Enter-button.
Содержание DLM-26
