DAPAudio DLM-26, Руководство по эксплуатации продукта

Страница: 24 / 33

22
Output-adjustments
By pressing the jog-wheel you can jump to Output 1-6.
If two outputs are linked, every equalizer change or crossover-frequency change affects both channels.
If you press the PREV / NEXT-buttons (
8+9 ), you can choose from:
Name
Please select the best fitting name from the name list.
The Output Name is selectable from a pre-programmed list. Use the
/ - buttons ( 5+6 ) or jog-wheel to
scroll through the list:
L Low, L Mid, L High
R Low, R Mid, R High
C Low, C Mid, C High
Subs, Low, Low Mid, Mid, Hi Mid, High
Mid + High
1” Horn, 1,5” Horn, 2” Horn
Bullet
Flat
Unused
Bar, Bstage
Delay
Center
Mono
Aux
Delay 1-6
10”, 12”, 15”, 18”, 21”, 24”
L Subs, C Subs, R Subs
Source
You can select which combination of Input(s) (is sent) to the Output Channel: Input A, Input B or Input A&B.
When Stereo Linked in a 2 channel 3-way Mode, you normally choose Input A&B.
Gain
The Output Gain is adjustable from -15 dB to +15 dB in 0.2 dB steps. The nominal Output setting is 0 dB.