Dantherm CC 3000, Руководство пользователя

Страница: 4 / 20

4
Schematic installation
Installation procedure Follow these steps to install the CC3000 upgrade Kit for Free Cooling Units.
Step Action
1 Make sure that the power to the Free Cooling Units is disconnected.
2 Find a location for satellite box and the CC 3000.
Satellite box as close to unit as possible.
3 Cut the power supply- and communication cable in right length to be connected to
the satellite box
4 Connect to satellite box
5 Connect the satellite box to the CC3000 with the included 8 wire cable.
6 Connect the enclosed Room temperature sensor to CC3000, place the sensor element
at same place as present sensor.
The temperature sensors from ACUE and TKS3000 will not work with CC3000
7 Outdoor temperature sensor. Connect the included temperature sensor to the satellite
box and locate the sensor element outdoor an appropriate place.
8 Connect power to the satellite box (plug is included in the kit package)
9 Insert the included SD cart into the CC3000.
The SD card contains several Configuration files for different products
10 Select the right Config file at the menu of CC3000
•
FB 450 AC
• FB 450 DC
• DFC 350 DC
• DFC 450 DC
• DFC 350 AC
• DFC 450 AC
11 See the enclosed CC3000 instructions manual for changing settings
12 The new CC3000 controller is now ready for service
Installation