Video file that you want to backup. The file size should not exceed the maximum capacity of the selected device.
5. Move the cursor to "Backup" and press " " key or click "Backup", the equipment will start to backup the video file.
5.8
SPOT output operation
Note: 16-CH Non-Real Time DVR is not equipped with this alarm function.
:
:
:
:
:
:
:
The camera and interval (SPOT time) for SPOT output are set in " CAMERA SETUP " of the main menu.
"
"
"
"
"
"
" "
"
"
" "
"
"
After selecting the camera, put the cursor on SPOT TIME , then you could set the time by press ing +/- key
or left/ right-click with the mouse. It could be set from 0 second
to 10 seconds. If output inter val of some channel is 0 se cond,
that chan nel won't output. For example, 8 seconds for channel
1, 0 seconds for channel 2, 3 seconds for channel 3; then in spot
output mode, channel 1 will turn to channel 3 after the image
displaying 8 seconds, channel 3will turn to the next channel after
the image displaying 3 seconds and so on.
The image of each channel will loop outp ut automatically
according to the time which is set in SPOT TIME . If you wan t to watch some channel, that is t o s ay, stopping loop
output for a moment and stay in one channel, you could do as the follow way in live or rec ord ing mo de. Pres s
key or click icon to pop up SPOT CAM01 on the top midd le of the sc reen . It means that SPOT output stays in
camera one, press the channel number key or click the channel number icon to switch the channel of SPOT output. Press
key again or ESC key to exit.
Network Digital Video Recorder Operation Manual ( V3.0 )
45
