Open the battery cover, install two batteries (Type No.7), make sure positive and negative
poles are right, then close the battery cover.
Before using it, please confirm that batteries have been installed correctly.
When using it, please aim IR TX (transmitter) of the remote control at IR reception of the DVR.
Then the DVR can be controlled by the remote control.
Using the remote control
Installing the remote control
Prompt:If you do not want to use the remote control, you could set in the system setup menu.
Set the sixth item REMOTE ID as OFF. Then the IR Receiver light on the front
panel will be off, and the operation of the remote control is invalid.
Trouble shooting
If the DVR can not be controlled by the remote control, please check the following aspects.
1. Check the
Check that whether Remote Sensor are blocked or not.
4. Whether Fluorescent lamps are being used or not nearby.
positive and negative poles of the batteries.
2. Check the electric quantity of the batteries.
3.
2
3
4
5
6
7
8
9
Digital Video Recorder
REC
STOP
FR
FF
PLAY
SEARCH
+
PTZ
F+
F-
I+
I-
1
0
10+
IR
AUTO
ESC MENU INFO
BAK
Z+
Z-
SEQ
Remote control
3.2
Remote control operation
Network Digital Video Recorder Operation Manual ( V3.0 )
18
