There are two ways for alarm output, Buzzer and Relay. They include three alarm modes:
(1) Video loss alarm;
(2) Video motion detection alarm;
(3) Sensor input alarm.
Setup way: Press " ENTER" key on the panel or remote control or click with the mouse to d ispla y or can cel "
" in
the small boxes.
Note: 16-CH Non-Real Time DVR is not equipped with this function.
4.10
Disk management
(1) Disk: select Disk.
(2) Disk size: used to display capacity of the current disk.
(3) Remain size: used to display percentage of the remaining capacity of the current disk.
(4) Bad size: used to display bad size of the current disk.
Network Digital Video Recorder Operation Manual ( V3.0 )
33
