Danish Interpretation Systems
User Manual
Manual 01 18 04467
30
VOX
VOX, voice activation mode, allows for the microphone units to be switched on
automatically if speaking in the microphone or by pressing the microphone ON/OFF
button.
This is indicated by a red light in the ‘Speak’ lamp in the microphone unit. Pressing the
microphone ON/OFF button again will turn the microphone off.
The microphone turns of automatically after finished talking after the time defined in the
“Release Time” setting, which is normally 4 seconds. The microphone can also be turned
off by pressing the ON/OFF button.
A Chairman Unit is always in Auto or VOX mode.
Please note, that Dual Units (like MU 6042) and units operation in a ‘Microphone
Sharing’ mode cannot run in VOX mode.
Individual modes (only with SW 6000)
When using SW 6000 it is possible to set individual
modes for the units.
The parameters can be set individual for each
conference unit:
Operation Mode
Use CU mode, FIFO, Manual, Automatic or VOX.
Speak Priority
Use CU mode, 5 (Chairman), 4, 3, 2 (VIP), 1(Delegate) or No
Speaking Rights
Chairman (5) is the highest priority and the microphone will
always be turned on regardless of operation mode.
In the Request list a unit with higher speak priority will be
placed before a unit with lower speak priority.
