Danish Interpretation Systems
User Manual
Manual 01 18 04467
11
The function and speak/request buttons can be
changed to match the local language and selected
functionality. Remove the plastic caps underneath
the unit and insert a thin device to eject the buttons
from underneath. Insert the new button by clicking
it into the unit. Insert the plastic caps after
changing the button(s).
The user interface can be changed to support other
languages. Please refer to the ‘DCS6000 Upgrade
Manual’ for information on creating, editing and
deleting languages as well as uploading them to the
DC 6990P.
The start image can also be changed to support
customised start images (other text, logo etc).
Please refer to the ‘DCS6000 Upgrade Manual’ for
more information.
The gooseneck microphone GM652x can be
locked to the unit with a 1.5 mm hex key. The lock
is accessible from the small hole to the left of the
XLR socket. Turn the hex key counter clockwise to
lock the gooseneck microphone to the unit and turn
the hex key clockwise to unlock the gooseneck
microphone from the unit.
The unit can be fixed to the table top using the
mounting holes on the underneath of the unit. Drill
a hole maximum 10mm deep using an Ø 2.5mm
drill and use a bottoming tap M3x0.5 to cut a
thread. Fasten the unit from below the table with a
long screw that fits with the dimension of the
screw hole.
The chip card reader is used for authentication and
can only be used in combination with the SW
6000. The chip cards must be inserted with the
chip facing downwards.
