Danish Interpretation Systems
User Manual
Manual 01 18 04467
31
Interrupt Ability
The Interrupt setting determines the microphone’s ability to
interrupt another speaker if the maximum number of speakers is
reached. The key is as follows:
Use CU mode
Not allowed: Cannot interrupt another speaker.
<=: Can interrupt a speaker with the same speak priority or a
speak priority which is less than own speak priority.
< : Can interrupt a speaker with a speak priority less than own
speak priority.
For most installations, the ‘Operation Mode’ for all
units is set to use the system mode ‘Use CU mode’.
It means that the operation mode for the units is
following the system modes, i.e. if the system is
running in ‘Manual mode’ the Delegates Units will
run in Manual mode.
When assigning units to run ‘Use CU modes’ the
modes are found in the following table:
Unit
Operation mode
Speak priority
Interrupt ability
Chairman
Automatic
5
<=
Delegate
Use CU mode
1
Use CU mode
VIP
Automatic
2
Use CU mode
However for certain application, it is desirable to
assign ‘individual operations mode’, where the
units will always follow the individual mode
settings independently of the ‘System Setting’.
I.e. the following ‘Units’ can be created:
Unit
Operation mode
Speak priority
Interrupt ability
No Speaking Rights
Does not matter
0
Does not matter
VIP unit
Automatic
3
<
Secretary
Automatic
2
<
Delegate FIFO
This unit will interrupts
other delegates if the
‘Maximum speaker’ are
reached
Use CU Mode
<=
