11
www.Daniel.com
USER MANUAL
Table 1-1: Part description for a standard enclosure
Item
number
Description
Part number
Quantity
required
1
(1)
End cap solid
1-360-00-025
1
2
(1)
Electronics enclosure
899-10-110-60
1
3
Plug pipe hex socket
154717-019
2
4
Grounding clamp
B18934-004
2
5
Mounting bracket
899-10-230-50
1
6
(2)
Socket head screw
899-10-230-52
4
7
Warning tag-Hazard
899-00-228-04
1
8
Socket head screw
899-10-230-61
2
10
(3)
2818 Dual channel preamplifier
1-504-05-550
1
11
Socket head screw
899-10-230-65
2
12
Wiring diagram for 2818 Dual channel
preamplifier
899-10-228-07
1
13
O-ring NBR
2-4-9163-245
1
14
O-ring FKM
1500093-022
1
15
Washer plastic
1-562-01-827
1
16
Clamp cover
1-504-90-165
1
17
Socket head screw
1-555-27-001
1
(1)
Enclosure housing and end cap material: stainless steel.
(2)
Screw length varies on LTM sizes. The screws are not included in the part number package.
(3)
2818 Dual channel shown. For other preamplifier options refer to
Interface parameters
.
NOTICE
The joint between the LME cover and housing is a threaded joint. The joint between the
LME housing and Sensor housing is a spigot joint with a minimum axial length of 26.16
mm (1.030 in), radial length of 3.18 mm (0.125 in), and a clearance of 0.07 mm (0.0028
in).
User manual
Introduction
P/N 3-9008-513
September 2020
User manual
13