Dangerous Music D-BOX+, Руководство пользователя

Страница: 32 / 40

3 2
enter setup mode
:
The gateway for programming the . Identical to pressing and holding the
usb
and
aes
/
spdif
setup buttons
simultaneously in the
ctrl room
section on the unit or in the
control room
app page. See previous sections for further
explanation.
enter dim amount
: Opens the
volume
app page. See sections on dim for more details.
set reference level
: This function defaults to off. To turn it on select . Next, press and hold the
mono
7-8
button
until it lights bright amber . Now
is active on your device (bright font, not dark). Navigate to
the
volume
page and you will see a new notice beneath the
dim
button . Tap the
dim
button twice. The
button will flash amber rapidly. Select your custom reference on the volume control. To commit, press the
dim
button.
To exit
setup mode
, navigate to the
control room
page and click on either the
usb
or
aes
/
spdif
button. Now when on
the
volume
page, the orange
message will turn
green
when at your reference level. To
disable the
set reference level
functionality, simply go into
setup mode
by selecting from the
more
page and pressing and holding the
mono
7-8
button
until the amber LED turns off. Now exit
setup mode
by navigating to
the
control room
page and clicking on either the
usb
or
aes
/
spdif
button. is now inactive on
your device (darker font).
Tip:
,
Set your
reference level
to an Equal Loudness Curve (the artist previously known as Fletcher-Munson). In other words,
use an SPL meter or phone app to set your volume near 85dB. This is where our ears frequency response is the flattest.
Track and mix where you’re comfortable (hopefully at lower levels), then check your mix periodically at the 85dB setting.
On the unit, push the
volume knob
twice to return to your
set reference level
. In the app, just hit the tap the
dim
button
twice.
scan and select d
-
box
+:
Locates and connects with your via
bluetooth
. This only connects for remote control functionality.
Not audio. See section
42
.
bluetooth audio
&
remote control setup
for more details.
launch device settings app
: This shortcut opens the settings page on your device to allow the use of its internal microphone as a
talkback mic and playing back
bluetooth
audio. Refer to sections
22 & 45
.
talkback mic
for more details.
launch device music app
: This shortcut opens the music player on your personal device, for example, iTunes.
disable d
-
box
+
bluetooth
: This turns off the
bluetooth
enable button, thus disengaging both
bluetooth
audio and
bluetooth
remote
control. Since
bluetooth
is now disabled, to reconnect, you will have to manually select the button on the front panel.
disconnect bluetooth audio
: Disconnects your
bluetooth audio
connection between your device and the with a simple button
press. Perhaps you want to give
talkback
or
streaming
control to the self-proclaimed record “poducer” (you get the “R”
when you’ve arrived) or you need to use your wireless earbuds to call your Great Aunt Baroness Evelyn Lickspittle or you
simply want to stream to any other device and not have a conflict between warring
bluetooth
factions.
preferences
: automatically searches for the and connects
bluetooth
for remote control.
Implements a physical sense like vibration to communicate an action has transpired.
For example, selecting a button will cause a quick clunk like sensation. (Only available on iOS devices with Haptic
Feedback Enabled).
If the app is in the foreground, it will remain live on your screen, regardless of sleep or
energy saving settings.
Allows your device to be used as a talkback mic. This is in required and does not
supersede the
launch device settings app
, you must activate both.
talkback
mic level.
If you have more than one , (singer-songwriter suites, for example) select the
preferred device and it will lock to that specific one.