Dangerous Music D-BOX+, Руководство пользователя

Страница: 29 / 40

2 9
47. BLUETOOTH REMOTE SPEAKER SWITCHING
individual mode
collective mode sub follow mode mono follow mode
Feature:
individual mode
select and audition one set of monitors at a time.
Benefit: Test your mixes on up to three sets of monitors toggle between them. (This is the default setup.)
Feature:
additive mode
select and audition multiple monitors simultaneously.
Benefit: Test your mixes or simply overwhelm your clients with sound, by latching up to three sets of monitors and playing them
at the same time.
48. SPEAKER SELECT CONTINUED (SUB)
Feature:
sub link
when choosing a set of monitors, the third monitor output, may be dedicated to a subwoofer instead. It may
require a separate button press for selection or be programmed to follow your tops.
Benefit: Tie a sub to your monitors, so every time you select them the subwoofer is activated (i.e. press
speaker
2
and the
sub
button turns on). Or choose to keep it independent for low frequency content checks. (The default is independent.)
Tip:
,
Remember to utilize
momentoggle
. It is programmed into all of these switches. (Refer to
section 3
).
Operation: To activate
sub link
, navigate to the
more
page. Select . Next, go to the
control room
page. You will
see the
usb
and
aes
/
spdif
setup buttons with the magic orange programming brackets around them alternately blinking
green like lighters during a 1980’s Guns N’ Roses concert. Then in the
speakers
section check to ensure that the 1
button is unlit. You are currently set to
individual mode
. (The default mode.) Next, press and hold the desired speaker 1
or 2 until it blinks quickly. Then light up the
sub
button. (Process may be repeated for the other speaker as well.) The
pairing may be confirmed by pressing the
speaker
button again. It will remain in
setup mode
. Exit setup mode by pressing
either the
usb
or
aes
/
spdif
setup buttons. It will now track with the speaker.
49. SPEAKER SELECT CONTINUED (MONO)
Feature: When choosing a set of monitors, the
mono
button has two possible behaviors: