Dangerous Music D-BOX+, Руководство пользователя

Страница: 30 / 40

3 0
[A] When unlinked in either
individual mode
or
additive mode
, the
mono
button will toggle on and off independently from
the speaker group. In other words, if you have the
mono
button engaged and move from
speaker
1
to
speaker
2
or
3
, the
mono
button will stay lit until you deselect it. (This is the default setup.)
[B]
link mode
tie the
mono
button to your monitors, so every time you select them
mono
is activated. (For example, if
you have a single monitor like an Auratone.) Press
speaker 2
and the
mono
button turns on. Press
speaker 1
and the
mono
button turns off. In this scenario, it can still be engaged for
speaker
1
, but it won’t remember to follow
speaker
1
until you
program it.
Benefit: Want to do a phase coherency check for TV, broadcast and on-board mobile device playback? Press the
mono
button at
your discretion. (This is the default.) Have a single monitor (Auratone)? Program the button to follow that speaker set.
Operation: Refer to
setup mode
section for details.
Tip:
,
Remember to utilize
momentoggle
. It is programmed into all of these switches. (Refer to
section
3
).
Operation: To activate
additive mono
, navigate to the
more
page. Select . Next, go to the
control room
page.
You will see the
usb
and
aes
/
spdif
setup buttons with the magic orange programming brackets around them alternately
blinking green like lighters during a 1990’s Whitesnake concert. Then in the
speakers
section check to ensure that the 1
button is unlit. You are currently set to
individual mode
. Next, press speaker 1 . Exit setup mode by hitting either the
usb
or
aes
/
spdif
setup buttons.
Operation: For
link mono
, navigate to the
more
page. Select . Next, go to the
control room
page. You will see
the
usb
and
aes
/
spdif
setup buttons with the magic orange programming brackets around them alternately blinking
green like lighters during Ozzfest. In the
speakers
section check to ensure that the
1
button is dimly lit. You are now
set to
individual mode
. Next, press and hold the desired speaker 1 or 2 until it blinks quickly. Then light up the
mono
button. (Process may be repeated for the other speakers as well.) The pairing may be confirmed by pressing the
speaker
button again. It will remain in
setup mode
. Exit setup mode by pressing either the
usb
or
aes
/
spdif
setup buttons.
mono
will now track with the speaker.
Note: 50% of the world still listens in mono- think about it. A “stereo” iPhone, playing through its speakers at 2” of separation
is mono. (Maybe not for a mouse.)
50. BLUETOOTH REMOTE HEADPHONES
individual mode
addititve mode